Advertisement
TTS765VAC by TITAN
Suction head
> Disassemble the suction head (1).
> Clean the chamber, wiper blade (1c) and wiper brush (1d) with water (Fig. 13).
> Dry the whole suction head before reassembling.
Dirty water tank
> Disassemble the dirty water tank (7).
> Empty the dirty water tank if necessary.
> Fill the dirty water tank with fresh and clear water. Slightly shake the tank to
clean it.
WARNING! Do not fill boiling or hot water in the dirty water tank.
> Empty and assemble the dirty water tank afterwards.
Maintenance
Before and after each use, check the product and accessories for wear and
damage. If required, exchange them for new ones as described in this instruction
manual. Observe the technical requirements.
MNL_TITAN_GB_3.7 V window cleaner_TTS765VAC_V2_200430.indd 23
1
1d
1c
Fig. 13
Care and maintenance
4/30/20 11:43 AM
EN
EN
23
Hide quick links:
Advertisement
