Before You Start - Titan TTS765VAC Manual

TTS765VAC by TITAN
10
10b
Charger
Use the charger (11) to charge the battery inside the product.
WARNING! Do not to charge the product with liquid in either the
spray bottle or the dirty water tank.
Battery has been shipped in a low charge
condition. Charge it fully before first use. Only
charge with the correct charger.
> Open the charger port cap (4a) (Fig. 5, step 1).
Attach the charger to the charge socket (4b)
(step 2). Ensure it engaged properly.
> Connect the charger plug to a suitable power
supply.
> The charging status is indicated by the charging status indicator (4c) as follows:
Charging status indicator (4c)
red
green
NOTE: It is normal for the charger to become warm (but not hot)
during charging process.
> When the battery pack is fully charged, disconnect the charger from the power
supply and charge socket.
> Restore the cap (4a). Ensure it engaged properly.
MNL_TITAN_GB_3.7 V window cleaner_TTS765VAC_V2_200430.indd 15
1.
10a
Fig. 4

Before you start

2.
10c
4c
4a
1.
2.
Fig. 5
Status
Charging
Charging finished
EN
4b
15
4/30/20 11:43 AM