Cambridge SoundWorks DTT2500 Installation And Operating Instructions Manual page 9

The rear satellites may be installed on Also, you may attach the rear
their convenient floor stands. While satellites under a desktop or at the
listening, the stands should be positioned sides of a desk using the hook and
to the left and right of your listening loop fasteners (see Diagram I).
position (see Diagram G). After you have positioned the rear
satellites, use the test sound to make
The Floor Stands are small enough
sure each speaker can be heard
to be stowed underneath a desk when
clearly.
not in use. See page 7 for floor stand
The Subwoofer. The subwoofer's
assembly instructions.
optimum position is on the floor
Larger work surfaces can accommo-
against the wall under the computer
date both front and surround pairs of
desk. The nearer the subwoofer is to
satellites on their Desktop Stands. Try
the corner of the room, the stronger
the extreme corners of a desk using the
its maximum bass output will be. We
Desktop Stands (see Diagram H).
strongly recommend placing the
H
5
subwoofer on the floor (see Diagram J). Substituting a powered
Leave at least 8 cm (3 inches) of subwoofer. You may substitute a
space between the subwoofer face powered subwoofer for the subwoofer
and a wall. Small objects in front of, that comes with the DTT2500 Digital.
but not touching the subwoofer (table Connect its line level input (typically
legs, for instance) will have no effect an RCA jack) to the dedicated
on its sound. If you have no subwoofer output on the back of the
available floor space, the subwoofer Decoder Amplifier, using a shielded
can be placed on a shelf, desktop or audio cable with RCA plugs on each
other sites, but its maximum output end. Refer to the powered
will be reduced. The subwoofer is not subwoofer's User Manual for
magnetically shielded, so position it adjustment procedures.
at least 18 inches away from a
computer monitor.
I
J
Applications Guide
Using DVD player on TV
Playing DVD Movies:
1. Connect Video Out of the DVD
Using PC-DVD player on PC
player to Video Input of your
1. Disable the 'Creative Multi
television.
Speaker Surround' (CMSS)
2. Connect Dolby Digital com-
function by pressing the CMSS
pressed signal output from your
button until all four LEDs are
DVD player to the DOLBY
off.
DIGITAL (AC-3) SPDIF IN of
your DTT2500 Digital decoder
For movies with Dolby
amplifier unit.
Digital 5.1 (AC-3)
3. Press the CMSS button until all
soundtracks:
its three LEDs are off to disable
This signal is detected auto-
the Creative Multi Speaker
matically and the DOLBY
Surround (CMSS) function.
DIGITAL LED lights up. You
will experience Dolby Digital
For movies with Dolby
5.1 channel output.
Digital 5.1 (AC-3)
soundtracks:
This signal is detected auto-
For two-channel movies
matically and the DOLBY
which are Dolby Surround-
DIGITAL LED lights up. You
encoded carried within the
will experience Dolby Digital
Dolby Digital compressed
5.1 channel output.
bitstream:
The Dolby Pro Logic decoder
will automatically decode the
For two-channel DVD
program for 5.1 channel movie
movies which are Dolby
experience.
Surround-encoded:
The Dolby Pro Logic decoder
will automatically decode the
program for 5.1 channel movie
experience.
Digital Analog
Audio Audio
PC-DVD ROM Drive
MPC-to-MPC CD-Audio Cable
LINE IN
CD_IN AUX_IN
MIC IN
LINE OUT
REAR OUT
4-Channel Sound Card
(e.g. Sound Blaster Live!)
Dolby Digital (AC-3)
SPDIF Out
AUDIO_OUT
DOLBY DIGITAL LINE IN REAR IN DIGITAL ANALOG AUTO
(AC-3) SPDIF IN DIN
INPUT 15V
DC IN
SPEAKER OUTPUTS
C SUBWOOFER RS LS R L
Encore Dxr2 / PC-DVD MPEG2
Decoder Card (Luxsonar)
Connection Guide for DeskTop Theatre 5.1 DTT2500 Digital with Sound Blaster Live! and Creative PC-DVD system.
14