QFX PBX-1211 User Manual

(4) FM Radio
Press to enter into FM radio mode, press SCAN to enter into radio program
automatic scan. Press for radio program manual scan,
trimming, Turn the TUNER button radio station can be adjusted. Slide around to
adjust radio frequency between 87.5MHz~108.0MHz.
(5) Bluetooth connection
Press to enter into Bluetooth Control connection page, then click "Speaker
Pro BLE" to connect to the speaker.
(6)Line In input - mute
Press to enter into Line IN input page, press
insert a line continue play. Press "Back" to main page.
(7) Equalizer regulation
Press to enter into Sound Set page, and then turn volume or bass or treble to
adjust the volume. There are 4 pre-set EQ modes: dance, Classical, Jazz and Rock.
You can also press G-Eq to access the graphic equalier to set up your preferred
equalize specification.
（5）
（4）
FM Operation
Lightly press Power/Input button to switch to FM mode, long press PLAY/PAUSE
button to automatically scan radio station, by pressing PREVIOUS or NEXT you
can select a previous or next song.
Bluetooth:
Press the POWER/INPUT button on the panel control to select Bluetooth mode.
Simultaneously open the Bluetooth setting on your phone, tablet or any other
Bluetooth enabled audio device and select "QFX PBX-1211". The unit and device
will then connect via Bluetooth.To control the device via your phone, tablet etc
please download the App "Speaker Pro".
Once the unit and device are connected via Bluetooth, open the "Speaker Pro" App
on your phone, tablet etc and press the Bluetooth button. This will enable you to
control the following five modes on the device from your phone: Music, Light,
USB Card, Bluetooth and Equalizer. To cancel the app, press the exit button.
Specifications:
Power: 20W
Frequency Response
for main speaker: 55Hz-20KHz
Power Supply: DC9V
Top and bottom
to mute music, press
（6） （7）
3
PORTABLE BATTERY SPEAKER
User Manual
PBX-1211