Cambridge Audio One+ User Manual page 21

Operating instructions (continued)
Note:
– One+ is not compatible with the Windows Media Audio lossless file format.
– USB device and SD card should be in FAT (e.g. FAT16, FAT32) format.
1. Press the button to start playing from the beginning of the album/folder.
2. Use the buttons to select the desired album file (USB/SD source only). Press
the button to start playback.
3. Press the buttons to skip between tracks.
4. To stop the playback at any point, press the
the unit is playing will pause the current track. When the unit is paused the track
time display will flash (except in iPod mode). Play can resumed by pressing the
button again.
i
5. Press to display elapsed track time, remaining track time, alarm, sleep and clock
status, additional information for MP3/WMA music format such as album number,
artist name and filename.
6. Press to eject the disc from the CD slot. Unplug device from the USB port or
remove the memory card from the SD slot by briefly pushing the card gently after
use.
Note:
– Do not put anything except a Compact Disc into the CD slot or any foreign objects
that may damage the mechanism.
– If the Compact Disc is seriously scratched or too dirty, the player may not be able to
read or play it.
– Never load more than one disc/memory card into the CD/SD slot at one time.
– Connect only a compatible USB device to the USB port and SD memory card to the
SD slot.
21
button. Pressing the button while
Repeat function
1. Ensure that a track is playing from the desired source (e.g. CD, USB, SD).
2. Press the Repeat button on the remote control. A 'Repeat' symbol will appear on the
display. Pressing once will repeat track, press twice to repeat album (or folder in
USB/SD mode) and press again to repeat all. Press for the fourth time to turn
Repeat function Off.
Random function
1. Ensure that a track is playing from the desired source (CD, USB, SD).
2. Press the Random button on the remote control. A
display. Press once to play random tracks and press again to turn the 'Random'
function off.
Program function
1. Ensure that source selected is in Stop mode.
2. Press Program on the remote control. The Program set-up will appear on the display.
3. Using the buttons, skip to the track number that you want to program as your
first track (or press the actual track number on the remote).
4. Press Enter. The desired track is now entered and the program number increases
by one.
5. Repeat steps three and four until all your desired tracks are entered.
6. Press Program to exit.
7. You can use the button on your remote control to skip through your
programmed selection in the same way as normal playback.
8. Pressing once will stop playback and pressing
program and return the player to stopped mode.
symbol will appear on the
twice at any time will wipe the