Fanton 62671 Quick Start Manual

LED FLOODLIGHT
62671 30W, 200-240V~ 50Hz
62672 50W, 200-240V~ 50Hz
62673 100W, 200-240V~ 50Hz
INSTRUCTION
Please read the instructions carefully to ensure that the installation is done in the correct manner. In addition, this manual
should be properly kept for future reference.
Warning:
Ensure electricity is switched off before installation.
Please read through all following instructions before installing the unit. If any doubt about correct installation, please consult a
qualified electrician.
Electrical safety:
This floodlight must be earthed. Always have the wiring and connections checked by a qualified electrician.
When in use, ensure all wiring and extension cable are kept clear of any cutting tools, sharp objects and any other potential
hazard such as wet floors, chemicals, solvents etc.
Any faults should be immediately rectified before further use of this floodlight.
Note: Always ensure that the mains supply voltage is correct. If the external flexible cable of this worklight is damaged, it shall
be exclusively replaced by qualified person in order to avoid a hazard.
Caution:
This unit can become extremely hot whilst in operation; do not touch the unit until it has had time to cool down.
Make sure this floodlight is far enough away from any combustible materials and/or surfaces. Make sure there is adequate
ventilation to aid heat dissipation.
SPECIFICATION:
Code number Rated power
62671
62672
62673
Electric shock protection class: I
Protection class : IP44
Rated voltage: 220-240V~ 50Hz
Power cord: H05RN-F 3G1.0mm
This symbol means that the product should not be disposed of a household waste at the end of its working life. (As directive
2012/19/UE). It has to be taken to a special local differentiated waste collection centre, following your country's rules, or
redelivered to the distributor when buying a new appliance. Correct disposal of this product will help prevent negative
consequences for the environment and human health.
FANTON SPA Viale dell'Industria, 8/10 – 35026 Conselve PD Italy – www.fanton.com
LUMEN
30W 2250LM
50W 3750LM
100W 7500LM
2
Maximum
Weight
projected area
1,5 kg 118 cm
1,95 kg 224 cm
3,30 kg 495 cm
Replace any cracked protective shield.
The minimum distance from lighted object is 1m.
Parts identification:
A: padded carry handle
B: lamp body
C: luminous panel
D: LED
E: mounting bracket
F: base di appoggio
Dimensions
(L-W-H)
2
214x284x292mm
2
254x331x337mm
2
313x445x382mm
IMT1022 R01