Alvin WRF38 Assembly Instruction

Tools Required:

Screwdriver, plyers, or small wrench.

Parts Included:

A
4pcs Caster Assembly
(16 Screws, Nuts)
E
1pc Dust Protector
Bottom Cover

Note:

Plastic clips can be snapped on easily by hand but pliers
may be necessary for removal. Most grid sections require
only 2 clips per side for support. For safety, clips attached
on exterior of cart should be positioned with flanges
facing inward.
Clip Attachment
See reverse side for assembly
King Size Mobile Roll File
Assembly Instructions
B
1pc Base Grid
F
1pc Hinged Center Partition
C D
2pcs Small
Side Grid
G
1pc Outer Support Bar
For model WRF38
2pcs Large Side Grid
H
45pcs Plastic Clips
Assembled Rack