Download Print this page

Ledino LED-FLIR20 Series Quick Start Manual

20 watts high power led floodlight with ir motion sensor

Advertisement

Quick Links

LED-FLIR20...
Specifications:
Light
Power supply:
180 – 240 V AC
Supply frequency:
50 Hz
Output:
max. 20 watts
Protection class:
IP 54
LEDs:
12 x 1.6 watts
Colour temperature:
6,200 – 6,700 K
Luminous flux:
825 lm
Beam angle:
100°
Permitted humidity:
< 93 %
Ambient temperature:
-10 °C to +40 °C
Dimensions (HxBxD):
189 x 177 x 180 mm
Weight:
approx. 1.6 kg
Sensor
Installation height:
1.8 m – 3.5 m
PIR angle of detection:
180°
Range of detection:
10 – 12 m
Twilight value:
3 Lux – 2,000 Lux
Duty cycle:
min. 8 sec. +/- 3 sec.
max. 7 min. +/- 2 min.
Energy consumption:
0.45 watts (standby: 0.1 watts)
4
LED-FLIR20sw
LED-FLIR20gr
20 watts High Power LED floodlight
with IR motion sensor
▪ 20 watts LED light is equivalent
to 150 watts halogen light
▪ 12 high power LEDs
▪ low energy consumption
▪ lasts 100x longer than halogen lamps
▪ automatic activation via twilight sensor and
infrared motion sensor
▪ environmentally friendly
▪ IP54 protected against splash water
LED-FLIR20ws

Advertisement

loading
Need help?

Need help?

Do you have a question about the LED-FLIR20 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Ledino LED-FLIR20 Series

  • Page 1 LED-FLIR20... Specifications: Light Power supply: 180 – 240 V AC Supply frequency: 50 Hz Output: max. 20 watts Protection class: IP 54 LEDs: 12 x 1.6 watts Colour temperature: 6,200 – 6,700 K Luminous flux: 825 lm Beam angle: 100° Permitted humidity: <...
  • Page 2 4 seconds. - Approx. 5 – 10 seconds after the signal was received, the light will turn on again and the Ledino Deutschland GmbH will flash twice every second. The light will turn off again after 5 – 15 seconds.

This manual is also suitable for:

Led-flir20swLed-flir20grLed-flir20ws