Table of Contents
Advertisement
28
advanced features
Picture Quality
Manual Tracking
Your VCR is equipped with automatic tracking control. This will
be adequate for most tapes and will automatically adjust the
tracking to suit the particular tape in use but if you insert an old
or worn tape, it may be necessary to manually adjust the track-
ing in order to get the best picture. If automatic tracking fails, you will notice noise bars appear-
ing across the picture; you can correct this by manually overriding the tracking using the follow-
ing steps.
override automatic tracking During playback, press / on the Remote Control to
engage manual tracking.
adjust tracking manually Use the
NOTES:
• Press / again to re-engage automatic tracking.
• When a new tape is inserted, the VCR returns to automatic tracking.
Picture Control
This feature allows you to select the most appropriate picture quality according to the type of
tape or use of this VCR. The default setting is
get to the mode set screen Press m. Move the highlight bar to
A and B buttons and press
select picture control mode Move the highlight bar to
and B buttons. Press
•
AUTO (NORM)
B.E.S.T. Picture System. When
CONTROL
•
Minimizes picture degradation during editing (record-
EDIT
ing or playback).
•
Reduces image coarseness when viewing overplayed
SOFT
tapes containing lots of noise.
•
SHARP
with lots of flat, same-coloured surfaces such as cartoons.
return to normal screen Press m.
All manuals and user guides at all-guides.com
(or E) to select the desired mode:
Provides optimised picture benefits of
B.E.S.T.
switches automatically from
Clearer, sharper-edged picture when viewing images
or
buttons to adjust the tracking manually.
PR +
–
.
AUTO
(or E).
PICTURE CONTROL
is
,
OFF
PICTURE
to
.
AUTO
NORM
using the
MODE SET
using the A
MODE SET
B.E.S.T.
ON
PICTURE CONTROL
AUTO
F
AUTO TIMER
OFF
O.S.D.
ON
DIRECT REC
ON
AUTO SP a LP TIMER
OFF
POWER SAVE
ON
AUTO POWER
OFF
[1] a k
[MENU]: EXIT
Advertisement
Chapters
Table of Contents
