XICOY X45 User Manual page 27

RUN Menu.
This menu is used to access all adjustable settings used for when the
engine is running.
Full Power Screen.
This shows the maximum power setting corresponding to full throttle
to the engine in Newtons and Lbs (L). (X90 shown)
You can use the buttons to derate the engine maximum power. The
display shows the new maximum RPM setting together with the new
maximum power.
Idle Speed screen.
This is pre-set at Auto, the actual speed dependent on the engine,
which allows the ECU to modify the setting in response to atmospher-
ic conditions. (X45 shown)
In hot or conditions of high altitude or low air pressure the ECU will
raise this value.
You can see any change the ECU has made by checking this screen.
Ambient Acceleration.
This is a setting which decides the rate of acceleration of the engine.
Default is Auto. ECU decides optimum for current conditions.
In case of acceleration problems, the setting can be switched to man-
ual pre-set of Cold, Mild, Warm or Hot. Each is a slightly longer accel-
eration ramp.
Ambient Deceleration.
This is a setting which decides the rate of deceleration of the engine.
Default is Auto.
ECU decides optimum for current conditions.
In case of deceleration problems, the setting can be switched to man-
ual pre-set of Cold, Mild, Warm or Hot. Each is a slightly longer decel-
eration ramp.
Page 27