Advertisement
Quick Links
INSTALLATION MANUAL
Single Monitor Desk Mount
M001
Supplied Parts List
Pole
C-Clamp
a (x1)
b (x1)
M10 Washer
Spring Washer
k (x1)
l (x1)
1
Option A : Clamp Installation
1. Connect Pole a and C-Clamp Brace c from the bottom using M5x14 Bolt f and
a
c
tighten with Allen Key 3mm o .
o
a
f
o
www.walielectric.com
support@walielectric.com
1-844-SATTLER (18447288537)
(10kg/22lbs)
75x75\100x100
C-Clamp Brace
Swivel Arm
c (x1)
d (x1)
Grommet Base Plate
Wire Clip
m (x1)
n1 (x1)
f
2. Select the preferred height according to your desk thickness. Connect C-Clamp b to C-Clamp
Brace c using M8x12 Bolt
c
clockwise to fasten for stability.
c
！
WARNING
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
！
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
● NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
RATED
● USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.
SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
VESA Plate
M5x14 Bolt
e (x1)
f (x3)
Wire Clip
Allen Key
n2 (x2)
o (x1)
b
g
and tighten with Allen Key 5mm o . Rotate the hand knob
o
c
g
b
Hand Knob
M8x12 Bolt
Nut
g (x2)
h (x1)
Wrench
M4x12 Bolt
p (x1)
q (x4)
Option B : Grommet Base Installation
1. Place Pole a onto Grommet Base Plate m . Connect them from the bottom using M5x14
a
Bolt and tighten with Allen Key 3mm
o
.
o
f
o
M10 Bolt
Support Plate
i (x1)
j (x1)
M4x30 Bolt
M4 Spacer
r (x4)
s (x4)
m
f
a
m
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ALI M001
Summary of Contents for ALI M001
- Page 1 ● NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND. RATED ● USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL. (10kg/22lbs) M001 USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER. 75x75\100x100 SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
- Page 2 Put the Wire Clip n1 and Swivel Arm d through the Pole a , adjust the preferred height and 2a. Existing Grommet Hole Installation 2b. Self-drilled Grommet Hole Installation tighten using Allen Key 6mm o . Attach the Wire Clips n1 to the Swivel Arm d . If the existing grommet hole comes with a plastic protector, remove it to ensure a flat surface before Mark the position of the hole on your mounting surface.
Need help?
Do you have a question about the M001 and is the answer not in the manual?
Questions and answers