Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Kaptia Klever
- Page 1 Getting started inspiring innovation ver. B6F19...
-
Page 2: Main Panel
Getting started 1 . Main Panel Klever main panel comprises two parts: Kaptia - An interface panel where user can switch on and off the console and turn on and off the Bluetooth interface in order to connect to mobile devices. - Page 3 Getting started 2 . Interface panel The interface panel is used for interacting directly with the console. It has buttons and led indicators that shows the user some states and functions. 1 - Battery Charge Indicator. It indicates if the charge proccess is running (red) or if it is finished (green).
-
Page 4: Connection Panel
Getting started 3 . Connection panel The connection panel serves as a link between the PC and the console and, besides this, it connects the console to various peripherals, if needed. The link to the PC is via a conection to an USB cable through A and the link with periphe- rals is through cable B. - Page 5 ® Make sure that radio Bluetooth is turned off. 3. Launch Kaptia Klever application and follow the indications. If you are not signed up, please, do it before sign in by clicking on “Sign up” link. ® device through ®...
- Page 6 Getting started 5 . Operating instructions 1 - Perform section 4 steps as appropiate. 2 - Sign in the application with your username and password. 3 - Select the action to take and follow the on-screen instructions. 5 .1. Analyzing remote control The console has a transmission area (see Figure 1) where the emitter should be put.
- Page 7 Getting started 5 .2. Programming a remote control Once a remote control has been analyzed, user has the possibility to make a copy or gene- rate a new one. Usually, EVO and MULTI models do not need user interaction and user has to plug them to the console and follow the instructions that application indicates.
-
Page 8: Firmware Updates
Getting started 6 . Firmware Updates Klever console has a system for updating the console’s firmware. Sometimes it is Kaptia possible that the console needs to be updated because of new versions available. We are able to know that this proccess is running due to the program is going to indicate this fact in the screen and the Battery Charge Status Indicator and the Bluetooth Link Indicator will start to blink. -
Page 9: Troubleshooting
If you have found any other problem or a fault occurs that cannot be solved using the infor- mation provided in this manual, refer to the Kaptia customer service department. The use of Kaptia Klever in these conditions may conduct to impredictible results. - Page 10 Store this manual safely for future use. Due to the dangers which may arise during both the intallation and use of Kaptia Klever, ins- tallation must be carried out in full respect of this manual, provisions and rules currently in force in order to ensure maximum safety.
-
Page 11: Technical Characteristics
Getting started 9 . Technical characteristics Kaptia Systems, in order to improve its products, reserves the right to modify their tech- nical characteristics at any time without prior notice. In any case, the manufacturer gua- rantees their functionality and fitness for the intended purposes. - Page 12 Getting started - 12 -...
- Page 13 Getting started - 13 -...
- Page 14 Kaptia Electronic Systems - January 2017 T.F. +34 988 618 939...