Kaptia Klever Getting Started page 7

5 .2. Programming a remote control
Once a remote control has been analyzed, user has the possibility to make a copy or gene-
rate a new one.
Usually, EVO and MULTI models do not need user interaction and user has to plug them
to the console and follow the instructions that application indicates.
FF or FV model needs the user interaction. In these cases, the user has to select the button
(or channel) where he wants to store the code. User has to follow the instructions that
application indicates after that.
5 .3. Reading a memory
If the user needs to read a memory, it is only necessary to plug the reader in the peripheral
socket and follow the instructions of the application.
Readers are currently available for:
®
- MutanCode
®
- JCM
®
- FLOR
®
- ERREKA
Getting started
- 7 -