Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kaptia Klever
Summary of Contents for Kaptia Klever
- Page 1 Quick user guide ver B6F19 | 09/2024 Page 1...
- Page 2 User interface Klever The user interface of the device consists of two parts: Kaptia - An interaction panel, in which the user can turn the device on and off, as well ® as connect and disconnect the Bluetooth interface for connection with mobile devices.
- Page 3 Interaction panel The interaction panel consists of buttons and light indicators that indicate various states and functions. 1 - Battery status LED: Indicates whether the charging process is in progress (red) or has finished (green). 2 - Operating LED: Indicates whether the device is operating, as well as other functions described in the operating manual.
- Page 4 The link with the PC is made through a USB connection through cable A and the link with the peripherals through cable B. (See figure 3). 2 - USB PC connector 1 - Peripheral connector Kaptia remote controls Auxiliary modules Figure 3: Connections Page 4...
- Page 5 ® from an Android device via Bluetooth - Connection with PC: 1. Download the software from www.kaptia.com 2. Install software and drivers 3. Connect the device to the PC's USB port and press the power button. ® Make sure the Bluetooth radio is disabled.
- Page 6 Instructions for use 1 - Perform the steps in section 4, as appropriate. 2 - Access the application with your username and password. 3 - Select the action to perform and follow the instructions that appear on the screen. Analyzing a command The device has a transmission area (see figure 1) in which the transmitter to be analyzed must be placed.
- Page 7 Program a remote To program a command, once the original has been analyzed, or if you want to generate one from the “Generate” menu, you must follow the instructions that appear on the screen. As a general rule, for new remote control models you will only need to connect it when the application indicates it and wait a few seconds.
- Page 8 Device update Klever device has a system that allows the update of its internal firmware. Kaptia Sometimes it is possible that the device is updated due to the existence of a new version available. In this case the battery status LED (green) and the Bluetooth LED will begin to flash.
- Page 9 Solution to common issues Issue Solution The red battery status LED The battery is low. flashes every few seconds Charge the battery. The device turns on, the The battery is discharged. battery status LED flashes red Charge the battery. and then turns off Check that the device is turned on and The PC application cannot correctly connected and that the Bluetooth...
- Page 10 For more information and guidelines, visit www.kaptia.com. - Any use or operation of Kaptia Klever that is not expressly provided for in these instructions is not permitted. Incorrect use may cause damage and personal injury.
- Page 11 Technical characteristics Kaptia Systems, in order to improve its products, reserves the right to modify its technical characteristics at any time without prior notice. In any case, the manufacturer guarantees its functionality and fitness for its intended purposes. The technical characteristics refer to an ambient temperature of 20º C.
Need help?
Do you have a question about the Klever and is the answer not in the manual?
Questions and answers