Installing The C-Arm And Swivel Brake - Siemens SIREMOBIL Compact L Installation And Setting Instructions Manual

Installing the lifting column

Installing the C-arm and swivel brake

•
Place the new collar over the lifting column, align it centrally and glue it tight.
•
Three persons are required to insert the C-arm back in the bearing.
•
Install the swivel brake again:
- Insert the bolt from below through the strap.
- Drive the spring pin back in with its opening in the direction of the expected pressure.
•
Place the Belleville springs in position. The lower spring with the cone upwards, the
upper spring with the cone downwards.
•
Screw the stop bush in.
•
At first only plug on the brake lever.
•
Screw tight the cover plates under the swivel brake.
•
Fasten the railing handle back on the C-arm.
Siemens AG
Medical Solutions
n.a. SPR2-130.841.02
Rev. 01
Page 5 of 10
07.05 CS PS 24
3 - 5
3
SIREMOBIL Compact L
System Manual