Pro's Kit SS-956 Manual

SS-956 SS-968 LCD REWORK SOLDERING
STATION
Thank you for purchasing Pro'sKit product. The SS-956 SS-968 LCD
Smart Hot Air Rework Station has been designed to meet high quality
standards .Please properly use and take care of your product for
prolonging service life. Please store the manual in a safe, easily accessible
place for future reference.
Packing List and Name of Parts
Name of Parts:
Hot air gun
Set button
UP button
(to increase temp.
or air speed.)
Packing List:
1. Smart Rework Station with
Holder
2. User's Manual
3. Hot Air Gun
4. Air Nozzle x 3
5. Power Cord
Features and Specifications
Features:
 Microprocessor-controlled with closed circuit sensor design provides
better performance and accurate temperature control.
 Temperature calibration function.
 Handle with sensor design switches work & sleep mode for real-time
operation convenience.
 Provide 600W high power and wide temperature range up to 480°C.
 Auto cool-off process to prolong the lifetime of heating element
 ESD safe design prevents static and electric leakage to damage the
PCB.
 Complies with CE and ESD standard, conforms to RoHS.
 High quality air pump supply and quiet operation.
 Silicone handpiece cord wire heat-resistant up to 200℃.
 Additional ground contact and power cord socket.
 Interchangeable and applicable to most of branded hot air nozzles.
Specifications:
SS-956B
Specification
SS-968B
220V~240V~,
Power Input
Power Consumption
Temperature Range
Heating Element
Temperature Calibration
Pump/Motor Type
Air Capacity
Suction Capacity
Auto Sleep Function
Auto Cool-Off Function
Equipment Noise
Temperature Display
Fuse
Power Plug
B
Heating Element Model No. 5SS-989NB-H
Hot Air Gun Model No. 9SS-968B-HG
Nozzle
Suction Cup: Φ12.5mm/Φ10mm/Φ6.5mm/Φ3mm x 1pce
Opening Lever(Width) : 15mm／20mm x 1pce（SS-956）
Dimensions
Weight
Package
Down button
(to decrease temp. or air
speed.)
Suction pen
(SS-956)
6. Vacuum Suction Pen (SS-956)
7. Suction Cup :
Φ12.5mm,Φ10mm ,Φ6.5mm,
Φ3mm (SS-956)
8. IC Popper : 15mm ,20mm
(SS-956)
SS-956C
SS-968C
110V~120V~，60Hz
240V~, 50Hz
50Hz
600W
Room Temperature~480°C(896°F)
Metal Heating Core
0~699℃(0~999℉) , Adjustable
Diaphragm Pump
24L/min(Max)
100g(SS-956)
YES
YES
<50dB
LCD (60mm X 35mm,Backlight)
5A/250V (φ5x20mm) 8A/250V (φ5x20mm)
C
5SS-989NC-H 5SS-989NE-H
9SS-968C-HG 9SS-968E-HG
9SS-900-A1 (ID:Ø 2.2mm) x 1pce
9SS-900-A2 (ID:Ø 6.6mm) x 1pce
9SS-900-A3 (ID:Ø 8.5mm) x 1pce
（SS-956）
250(L)*230(W)*170(H)mm
3.2kg
Color Box
Main Menu
How to Use
1. Please remove the pump securing screw (M5x12 with red mark) from
the bottom of the rework station. Failure to do so may result in serious
problems (Fig.2)
Remove the
screw before use
2. Insert the power plug into socket.
3. Power on the rework station, and LCD screen will display standby
status after two seconds (Fig.3). When lift the hot air gun, LCD screen will
display the last setting temperature..
4. Do not unplug the power plug instantly after turning off the power
switch, because the fan will keep operating to cool down the heating
element. The power plug only can be unplugged while the fan stops
operation completely.
Temperature and Air Speed Setting (Hot air gun can not
be placed on the holder while setting)
1. Power on the rework station, lift the hot air gun, LCD screen will
display main menu (Fig. 4), last setting temperature will display.
Press the "SET" button for one second; then choose temperature
2.
setting mode or air speed setting mode.
In temperature setting mode, the "Set Temp" words will shinning,
3.
adjust the temperature by using the UP▲ and DOWN▼ buttons. In
another way, you can also press the UP▲ and DOWN▼ buttons directly
in the main menu to set the temperature.
In the air speed setting mode, the " Air Speed " words will
4.
shinning, adjust the air speed by using the UP ▲ and DOWN ▼
buttons(air speed range from 20~100). After stopping operation around
SS-956E
two seconds, it will go back to the main menu.
SS-968E
Temperature Calibration Setting
The hot air gun should be recalibrated after changing the gun, replacing
the heating element or nozzle.
E
( Fig.1)
Temperature setting Real Temperature
Real Temperature
Air capacity
Air speed
Fig.2
Fig.3
Fig.4
Press "SET" button and Down button
1.
"▼" in the same time, and main menu will
display "CAL" and setting temperature. Press
UP ▲ or DOWN ▼ to input actual
temperature, press "SET" button to
confirm and back to the main menu.
2. When the status display under
temperature is "---", it means temperature has
not been calibrated.
Fig.1