Download Print this page

Cablematic HPC-W27 Installation Instruction page 2

3g wcdma 2100mhz mobile phone signal booster

Advertisement

HPC-W-27 2100mhz repeater Inside and Outside Design
HPC-W-27 Dual band repeater is to support any two mobile band existing in the world to
help end users to improve mobile signals for much better phone call quality and smoother data
transmission. It is designed to support coverage area max can up to 2000 square meters with
proper engineering. Below are the main features.
1. The consumer repeater is an ideal solution for providing a cost effective improvement in
cellular in-building coverage of a home, office, restaurant or building, in the quickest time
possible.
2. Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for
proper coverage during installation or maintenance.
3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the
repeater has built-in AGC and ALC circuits, which can automatically control the gain of the
repeater depending upon the strength of input signals.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscilation
from jamming the towers, saving your trouble from operators.
5.Wide band feature enables all devices operating within the wide frequency range of the
repeater to see an improvement in performance.
6.Multiple phones and other handheld devices throughout a building can benefit from a wireless
repeater.
7.Supports up to (500) users / calls simultaneously.
8.Extended phone battery life. (Your phone does not need to put out as much power due to
improved reception.)

Advertisement

loading