Advertisement
Step 6 – Attach hinges (8) to side panel
a. Next to each hinge slot there are 4 holes.
These holes are for the cap screws (12) used
to attach the hinges to the side panels.
b. Align the hinges with the holes in the side
panel opposite the door latch. (In the diagram
below, the latch is on the left side, so the
hinges attach to the right side.)
c. Fasten the hinges to the side panel with flat
head socket cap screws (#10-32 x 1in.) and
10-32 hex nuts.
Cap
screw
holes
Step 7 – Attach hinges to door (7)
a. Align the free sides of the hinges with the hinge holes in the door.
b. Fasten the hinges to the door with flat head socket cap screws (#10-32 x 1in.) and 10-32 hex nuts.
c. Close the door and confirm that the latch fits through the latch opening in the door. The door should seat
in the door groove of the latch (see Step 4 on p. 5).
d. The door can be locked closed by hooking a padlock through the opening in the end of the latch.
Rev. 5/16/2014
Hinge
slot in
left side
panel
crossbar
Flat head socket cap
screw #10-32 x 1in.
10-32 hex nut
Latch
opening
Copyright 2014 Vestil Manufacturing Co.
Page 6 of 8
CYL-H-4-KD, manual.doc
Door
latch
Complete cabinet
assembly
RD
Opening for padlock
Flat head socket cap
screw #10-32 x 1in.
10-32 hex nut
Advertisement
