Stocking The Beverage Center; Bottom Rack 6 Bottles; Beverage Center Care; Cleaning - Whirlpool W11176204A Use & Care Manual

Stocking the Beverage Center

To Stock the Beverage Center:
1. Place juices, sodas or other canned beverages on the glass
shelves.
Top Wine Rack:
1. Slide wine rack open.
2. Starting on the left-hand side of the wine rack, place the
first bottle with the neck of the bottle facing the front of the
Beverage Center.
3. Place the next bottle on the rack with the neck of the bottle
facing the back of the Beverage Center. Alternate the
direction of the bottles, in this manner, until the rack is full.

Cleaning

WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Clean the Beverage Center about once a month to avoid
buildup of odors. Wipe up spills immediately.
To clean your Beverage Center:
1. Unplug Beverage Center or disconnect power.
2. Remove all removable parts from inside, such as shelves,
etc.
3. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
Do not use abrasive or harsh cleaners such as window
■
sprays, scouring cleansers, flammable fluids, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts, interior and
door liners or gaskets. Do not use paper towels, scouring
pads, or other harsh cleaning tools. These can scratch or
damage materials.
To help remove odors, you can wash interior walls with a
■
8
8
+
6
=
14

BEVERAGE CENTER CARE

4. Slide the wine rack into place.
NOTE: The wine rack can be stocked with the bottles facing
either direction, however, to optimize storage adjacent bottles
should be facing in opposite directions.

Bottom Rack 6 Bottles

Bottom Wine Rack
Starting from left-hand side of the bottom rack, place the first
bottle with the neck of the bottle facing the front of the
Beverage Center. Continues to place the remaining bottles
facing in the same direction.
mixture of warm water and baking soda (2 tbs to 1 qt (26 g
to 0.95 L) of water).
4. Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water. Do
not use abrasive or harsh cleaners, or cleaners containing
chlorine. These can scratch or damage materials. Dry
thoroughly with a soft cloth.
5. Replace the removable parts.
6. Clean the condenser coils regularly. They are located behind
the base grille. Coils may need to be cleaned as often as
every other month. This may help save energy.
Remove the base grille. See "Base Grille".
■
Use a vacuum cleaner with an extended attachment to clean
■
the condenser coils when they are dusty or dirty.
Replace the base grille.
■
7. Plug in Beverage Center or reconnect power.