Advertisement
Note: To enable the servo to move a full 180° use pulse durations of approximately 750 to
2250 μs. Exercise care to not exceed these lower and upper limits.
Parts List
Parallax Standard Servo
•
BASIC Stamp HomeWork Board, Propeller QuickStart, or Arduino Uno microcontroller
•
22 gauge solid conductor hookup wire
•
4 x AA battery holder, 4 AA alkaline or 4 AA NiMH batteries (Propeller QuickStart)
•
Basic Wiring
Power requirements: 4 to 6 VDC
•
Power consumption: 15 mA @ 6V (when idle)
•
Torque: 38 oz-in (2.8 kg-cm) @ 6V
•
Dimensions: 2.2 x 0.8 x 1.6 in (55.8x 19 x 406 mm) excluding servo horn
•
Copyright © Parallax Inc.
Page 2 of 5
Advertisement
