Subscribe to Our Youtube Channel
Related Manuals for CME WIDI-X8
Summary of Contents for CME WIDI-X8
- Page 1 Wireless MIDI Interface User’s Manual ————————————————— Model：WIDI-X8 Read “Precautions” on page 5 before use Please ready this manual carefully before use. Please keep this manual for reference.
-
Page 2: Open The Package
Thank you for choosing CME WIDI-X8 wireless MIDI interface. Please keep all the important information here. Attach your invoice or receipt here ～～～～～～～～～～～～～～～～～～～～～～～ for reference Purchase Dealer’s Dealer’s tel. Warning: Improper connection may cause damage to the device. Copyright Copyright of the manual belongs to Central Music Co. Anyone must get a written permission from Central Music Co. -
Page 3: Special Message Section
SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, CME reserves the right to change or modify any of the specifications, without notice or obligation to update existing units. -
Page 4: Fcc Information (U.s.a)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by CME may void your authority, granted by the FCC, to use the product. - Page 5 14. Do not use the instrument when there is a gas leak nearby. 15. Switch off your WIDI-X8 when inside or near aircraft. The use of RF product in aircraft is illegal. It may be dangerous to the operation of the aircraft 16.
- Page 6 19. Please do not use your WIDI-X8 near any precision instrument, which may cause noise or abnormal operation to the instrument. 20. Switch off your WIDI-X8 at a refueling point, such as a petrol station, even if you are not refueling your own car.
-
Page 7: Other Precautions
general public to electromagnetic fields 0 Hz-300 GHz, Official Journal of the European Communities, July 12,1999. ANSI/IEEE C95.1-1992. “Safety levels with respect to human exposure to radio frequency electromagnetic fields, 3kHz to 300 GHz”. The Institute of Electrical and Electronics Engineers Inc., New York, 1991. FCC Report and Order, ET Docket 93-62, FCC 96-326, Federal Communications Commission (FCC), August 1996. - Page 8 This page was intentionally left blank.
-
Page 9: Table Of Contents
Features ... 10 System requirement... 11 Operation ... 11 Power supply ... 12 Channel selecting ... 12 Connection and routing ... 15 Removal of the product ... 16 Automation ... 16 Automatic communication establishing ... 16 Automatic notes off ... 17 On-line detection... -
Page 10: Features
1 Features Professional WIDI products with all the function. The working band is 2.4GHz ISM. Bi-directional MIDI data transfer. 64 radio channels for MIDI data transfer, with manual or automatic radio channel setting mode. Manual switching for one-to-multi communication (auto finding and selecting). MIDI ports and USB port for various data route including USB MIDI. -
Page 11: System Requirement
2 System requirement MIDI device with MIDI ports GM compatible sound card or other tone generator Computer with 366MHz or faster with available MIDI ports or USB port Win ME/XP or Mac OS X Cakewalk or other music software The less obstacles, the better performance Avoid using blue teeth or other RF device to minimize interference 3 Operation ①... -
Page 12: Power Supply
DIP 3-8 are used to select radio channel, please see appendix for detail. 3.1 Power supply You can use any one of the three ways for WIDI-X8 power supply, 2 x AA size battery, USB bus power, or DC IN. 2 x AA size battery Set the power switch to ON, when the power supply is OK, the red indicator is on. - Page 13 To change the radio channel, please press and hold the frequency set button of any WIDI-X8 of the pair for about 3 seconds, the it will search a free radio channel again. When it find a available channel, it will told another WIDI-X8 to set to the same radio channel, and both signal indicators are on.
- Page 14 Set all the WIDI-X8s to the automatic frequency setting mode, and regards one WIDI-X8 as the master, and the other ones as the slaves. Press the frequency set button in the master unit, and the master unit will search for a free slave unit and establish communication with it.
-
Page 15: Connection And Routing
3.3 Connection and routing The WIDI-X8 can send or receive MIDI data via the MIDI IN, MIDI OUT or USB port; plus the RF(radio frequency) , so you can route the MIDI data among MIDI ports, USB and RF to meet your need. -
Page 16: Removal Of The Product
MIDI data from MIDI IN. For the route b), please set the MIDI OUT device to “USB Audio Device”, and the computer sends the MIDI data to MIDI OUT of the WIDI-X8 2. The MIDI OUT data from WIDI X8 2 will also be send via RF to WIDI-X8 1. 3.4 Removal of the product Please follow the below steps to remove the WIDI-X8 from your system after using it: （1）For the MIDI connection, you can directly unplug the MIDI cable from the... -
Page 17: Automatic Notes Off
5 Notes To use the WIDI-X8 with you computer via the USB connection, please make sure the WIDI-X8 is properly connected to the computer and switched on before you launch you music software. -
Page 18: Appendix
WIDI-X8s are on, which means proper communication. The WIDI system supports up to 32 pairs of WIDI-X8 used at the same place. If you use many pairs of WIDI-X8s at the same place, please set the radio channels within 1-32, that is, DIP3 is always set to position “0”. - Page 19 0 1 0 1 1 0 0 1 0 1 1 1 0 1 1 0 0 0 0 1 1 0 0 1 0 1 1 0 1 0 0 1 1 0 1 1 0 1 1 1 0 0 0 1 1 1 0 1 0 1 1 1 1 0 0 1 1 1 1 1...
- Page 20 2006-Sep Central Music Co. Tel: +86-10-8580 1115 Fax:+86-10-8580 1114 Web: www.cme-pro.com E-mail for support: support@cme-pro.com...
Need help?
Do you have a question about the WIDI-X8 and is the answer not in the manual?
Questions and answers