Send Initializing Sysx - CME UF5 User Manual

2 After new controller number is assigned, release
FUNC. button.
Hint
For detail about assignable controllers, refer to appendix 5.1
When the LED indicator for "KNOB FUNC." does not light, knobs function list:
Knob Func CUTOFF RESONANCE ATTACK RELEASE PAN
Controller# 74
Default 64
Value range 0-127
Hints:
1.If your external device does not support TEMPO message or is not set up
properly, the TEMPO knob will not work.
2.The TEMPO range is 20-250.
When the LED indicator for "KNOB FUNC." lights, knobs function list (You can
assign each knobs to different controller #):
Knob Name KN1
Knob Func Expression
Controller# 11
Default 127
Value range 0-127

3.3 Send initializing sysx

3.3.1Send GM on message (GM ON)
Push DRAWBAR and V.CURVE at the same time, the key-
board will send sysx for GM on (F0 7E 7F 09 01 F7).
By sending GM on message, you can make GM initializing for
General MIDI compatible tone generators.
3.3.2 Send XG on message (XG ON)
Push PROGRAM and TRANSPOSE at the same time, the
keyboard will send sysx for XG on (F0 43 10 4C 00 00 7E 00 F7).
By sending XG on message, you can make XG initializing for XG
compatible tone generators.
3.3.3 Send GS on message (GS ON)
14
USB MIDI Master Keyboard
71 73
64 64
0-127 0-127
KN2 KN3
Breath BANK MSB
2 0
127 0
0-127
REVERB CHORUS TEMPO
72 10 91
64 64 40
0-127 0-127 0-127
KN4 KN5, KN6, KN7, KN8
BANK LSB Expression
32 11
0 127
0-127 0-127
KNOB
93 -
0 120
0-127 20-250
0-127