Advertisement
BE SURE TO LAY A CLEAN BLANKET, BUBBLE WRAP OR CARDBOARD
•
BENEATH THE FIBERGLASS COMPONENTS TO AVOID SCRATCHING.
INVENTORY ALL PARTS, COMPONENTS, BOLTS, NUTS BEFORE ASSEMBLY.
•
BE SURE THAT YOU HAVE ALL NECESSARY TOOLS ON HAND BEFORE
•
ASSEMBLY
ASSEMBLY IS A MINIMUM 2 PERSON JOB; ARRANGE AN ASSISTANT BEFORE
•
HAND.
1. Everyone who uses this slide must know, understand and follow these instructions
2. The ANSI/NSPI-4 2007 standard for above ground pools prohibits the use of slides or diving
boards on above ground pools.
3. This Slide is designed for residential inground pool use ONLY. This slide may not be used on
any above ground pool. Such use of this slide may result in serious injury or death.
4. This slide should never be installed on above ground pools, ponds, floating docks or platforms,
boat docks or houseboats or any natural body of water.
5. This slide should never be installed on any commercial, public or semi-public pool.
6. Be Familiar with the shape and depth of the pool before you slide. This slide should only be
used with the proper water safety envelope, as described in Diagrams and in accordance with
the slide positioning instructions, as described in Diagrams.
7. Because the slide may only be used in water 4' deep or greater, all slide users must be able to
FibroSlide Assembly Instructions:
•
Advertisement
