VOSS.farming XTREME duo X110 Instruction Manual page 38

5.2 Information screen
Symbols on the display when the fence load is displayed:
Battery voltage (input)
5.3 Settings screen
It is used to set the energiser parameters. The following functions are available:
Alarm
The voltage setting at which the alarm is triggered can be set in the range 0 - 8000 V.
This set value triggers an alarm when the voltage falls below the set value. If 0 V is
selected, no alarm is triggered.
38
>1000 Ohm – short fence with minimal vegetation
1000 Ohm – medium fence, slightly overgrown
500 Ohm – longer fence, light vegetation
300 Ohm – longer fence, with medium vegetation, or slightly
overgrown after rain
< 300 Ohm – densely overgrown fence with high voltage losses
Output voltage
Information screen
Fig. 8 - Second information screen
Display: fence load
Output power