About This Manual
Note the following symbols in this manual.
indicates a warning message about safety precautions.
Please read it carefully.
indicates a helpful tip or precaution to note.
1. Quick Start
1.1 Initial Set Up
The SVR is easy to use. To operate, simply
•
•
•
•
•
1.1.1 Insert the Batteries
Remove the Black & Decker
charge them according to the VersaPak
2.1.2 Battery Charger for more about using the battery charger.) Insert the
batteries into the handle grip by pushing them into the receptacles in the
bottom of the handle until you hear them snap into place.
* VersaPak™ is a registered trademark of the Black & Decker Company.
SURFACE VELOCITY RADAR (SVR)™ USER'S MANUAL
charge and insert the batteries
power up
aim at the target
set the horizontal angle position of the gun to target
pull the trigger, and record the velocity.
®
VersaPak
Figure 1.1.1 Insert the batteries into the handle grip.
™
batteries from their package and
™
instruction sheet (see section
7