Introduction To The Railmaster-Vp; About This Manual; Quick Start; Initial Set Up - Decatur Electronics RAILMASTER-VP User Manual

RAILMASTER-VP™ USER'S MANUAL

Introduction to the Railmaster-VP

The Railmaster-VP
with a Black & Decker
radar gun contains an antenna and transceiver for transmitting
and receiving K-band frequencies. The exclusive Digital Signal
Processing (DSP) algorithms in the Railmaster-VP use these
frequencies to obtain target vehicle speeds, which appear in the
display window.

About This Manual

Note the following symbols in this manual.
indicates a warning message about safety precautions.
Please read it carefully.
indicates a helpful tip or precaution to note.

1. Quick Start

If you are already familiar with radar tracking devices, you will
probably want to follow the quick start instructions.

1.1 Initial Set Up

1.1.1 Insert the Batteries

™
* VersaPak is a registered trademark of the Black & Decker
6
is a cordless, hand-held radar gun that comes
™
interchangeable battery system. The
®
Remove the Black & Decker
batteries from their package and charge them
according to the VersaPak
(see Section 2.1.2, Battery Charger, for more
about using the battery charger). After charging
the batteries, insert them into the handle grip,
as Figure 1.1.1 shows.
™
® VersaPak
instruction sheet
TM
®
Company.
*
TM