Test method
A means of manually testing the correct
operation of the float valve.
Pull the cable progressively, using the ring,
to bring the float to its top position.
Lower the float slowly to its rest position.
Repeat this operation several times to make
sure that nothing prevents the float moving
freely throughout its travel.
It is essential to ensure that the tester orifice is always on the manhole plate and not on the tank
2) Support clamp
Description
Support clamp 50/60
Support clamp 80/90
Perspective 2
+/- 180
Self Climat OPD
DN 80 Réf.308276
Tester in the position - fitted on a float valve
Reference
308 242
308 243
Tapping 1°
17