Maintenance And Inspection; Periodically Replaced Parts; Durables - Canon DADF-AA1 Service Manual

Chapter 5
3) Using tweezers or the like, attach a new stamp.
Be sure to attach the new stamp with the stamp face up.
4) Close the feeder cover and separation guide.

5.2 Maintenance and Inspection

5.2.1 Periodically Replaced Parts

5.2.1.1 Periodically Replaced Parts

This machine does not have parts that must be replaced periodically.

5.2.2 Durables

5.2.2.1 Durables

Some parts must be replaced due to deterioration or damage at least once within the warranty period. The following tale lists the expected average lives (number
of document sheets supplied) of the parts that requires replacement when they become defective.
The number of document sheets that have been fed can be checked in the service mode of the host machine.
No
.
1
2
3
4
The numbers of sheets listed above are estimated ones, so they may change with the experimental data.
5-2
If the stamp is floating, a jam can occur. Be sure to push in the stamp
until it clicks.
Part name Part No. Quantity
Pickup roller FM3-6892
Separation pad FL2-9942
Feed guide (dust FL2-9935
collection tape)
Stamp (Option) FC7-5465
F-5-3
Expected life Remarks
1 80000 sheets The number of document sheets that
have been fed can be checked in the
1 80000 sheets
service mode of the host machine.
1 40000 sheets
1 7000 sheets Replace it when the stamp image
becomes faint.
As of March, 2008
0024-7046
0024-7047