Firmware History - Elatec TCP3 User Manual

TCP3 is equipped with the ability to upgrade its firmware using 3 different
methods:
1. Remotely using the TCP3 Config tool
2. Remotely from the TCP3 System web page
3. Locally via a USB flash drive
Please refer to the Technical Manual for more information about the
firmware upgrade.

5. Firmware history

Version
10.1.1. Initial release
Firmware
STD3.0.0.0
10.1.2.
Factory default password changed from admin to last 8
Firmware
digits of TCP3 Host MAC address
STD3.0.1.0
• Network setup supports printers on static IP address
• Enable client connection via http using web service calls
• Updated Syslog window behavior
• Enable status log to use local time instead of UTP
• Enable remote configuration of connected TWN4 card
reader
• Status page now shows TCP3 hardware version
• Status page now shows description of connected USB
device
• Status page shows configuration details of connected
TWN4 reader
• Status page shows memory usage based on 8 gig memory
device
• Qualified additional USB devices to the white-list
ELATEC GmbH
Changes
Page 9 of 12