Related Manuals for Milwaukee M18 FDEX
Summary of Contents for Milwaukee M18 FDEX
- Page 1 OPERATOR'S MANUAL Cat. No. M18 FDEX, M18 FPDEX M18 FUEL HAMMERVAC 26 MM & 28 MM DEDICATED DUST EXTRACTORS WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: Electrical Safety
• Remove any adjusting key or wrench before IMPORTANT SAFETY INSTRUCTIONS turning the power tool on. A wrench or a key left WHEN USING WARNING attached to a rotating part of the power tool may result in personal injury. ELECTRICAL DUST EXTRACTOR, •... -
Page 3: Specific Safety Rules For Dust Extractors
8. Dust box latches as those dust masks that are specially designed to 9. Hammer release button • Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a ® replacement. -
Page 4: Specifications
(Cat. No. 14520105 and Large SPECIFICATIONS Cat. No. 14520110) nozzles, Cat. No..........M18 FDEX rotate the nozzle release lever For use only with M18 FH M18 FUEL™ 26 mm down to the open position and SDS PLUS Rotary Hammer pull out nozzle from the lower nozzle assembly. - Page 5 For best results, use a bit 203 mm (8") in length or shorter for M18 FDEX and use a bit 254 mm (10") in length or shorter for M18 FPDEX. Fitting the HAMMERVAC™...
-
Page 6: Operation
Return the tool, battery pack, and charger to a MILWAUKEE service facility for repair. ® After six months to one year, depending on use,... - Page 8 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...