Bushnell Trail Scout 11-9501 Instruction Manual page 10

Copying Photos To A Second Card
To perform the copy process, a blank SD card (or one previously used to copy files with the Viewer) should
be inserted in the "Storage" slot located below the CF card slot. You may use standard or high speed SD
cards, with any capacity up to a maximum of 1GB.
To copy one or all of the photo files from the card in a "Camera" slot to the SD card in the "Storage" slot,
hold down the Copy button until you see the Copy Menu:
COPY ONE
COPY ALL
EXIT
The Copy Menu works the same way as the Delete Menu-press the Delete or Copy buttons to select
(highlight) an option, and press the Left button to confirm or perform an action.
Select COPY ONE (to copy only the currently displayed photo/video) or COPY ALL (to copy all files
stored on a "Camera" slot card to the "Storage" slot SD card) from the Copy Menu options.
Next, press the Left button. During the file copying process, the display indicates "Copy to Card", with
"Please Wait" flashing below (larger files such as high resolution photos or long videos will take longer
to copy). The name of the file being copied is also displayed at the bottom of the screen. When the copy
process is completed, the display will indicate "End Copy File" and return to the normal view screen. If
you have more files on other cards to copy to the Storage card, simply remove the first Camera card, insert
the next one, and repeat the Copy process.
Note: Do not turn off the Viewer or remove any card during the copy process, to
prevent possible damage to the card or your files.
10
-
cont.