Page 1
WiFi IP CAMERA QUICK OPERATION GUIDE - 1 -...
Page 2
Apply for Model:P1-4X /P2-20X/P3-4X/P14-4X Note: Due to the continuous updating of the products and software,there may have some discrepancy between the operating guide and APP interface.All the instructions are subject to the actual operation interface.If you want to know if you can update the fireware,pls contact technical team.
1. Introduction Thanks for buying YoLuke Security IP Camera. This manual describes all the parameters,functional structures,usage,common problems and solutions for the cameras in detail.This would help you know the camera quickly and use it easily. If you have any problems with our camera or confused in the settings, please contact with us,and we will provide technical support and service at the first time.
2. Installation 3. SD Card Slot 4. APP Download Download APP“CamHipro”in Google Play or Apple Store,or scan the QR Code to install.Also we would recommend : Tinycam/Ip Pro3,and ISpy. - 5 -...
5. Mobile APP CamHipro Connection 5.1 Connect the Camera by Network cable Install the APP, connect the mobile phone to the WIFI network, enter the APP and click the Add Device button to enter the Add Device interface. Choose different adding methods according to different types of cameras, because common IP cameras cover various adding methods.
Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 5.2 Connect to IP Camera Hot-Spot and then Configure Wi-Fi Go to your cell phone’s Wi-Fi Setting -- search Wi-Fi signals -- connect the Wi-Fi. The name of Wi-Fi Hot Spot is the UID on the camera (Wi-Fi name:IPCAM-900139) 01234567 Camera default Wi-Fi Hot Spot password: Remark: Only when the mobile phone is 3-5 meters away from the camera can the hot spot signal be...
5.3 Add Camera Add your camera to ‘CamHipro’ APP follow the steps of the below pictures. Step 1 Step 2 Step 3 5.4 Wi-Fi Setting Set Wi-Fi for your camera with the your Router’s Wi-Fi,follow the steps below: - 8 -...
Step 1 Step 2 Step 3 Step 4 5.5 Connect the Camera by Search Nearby Devices Connect the camera to the power supply and the camera would turn into self-test mode, which A) would take about 15 seconds. Open the ‘CamHipro’ APP. B)...
5.6 Mobile APP Function Introduction 5.6.1 Micro SD Card Video files playback and download Opps:if you download the recorded video files from pc,then the files can only be played in hiplayer. - 11 -...
5.6.2 Local files, device list and add other new camera Click to view the local file of different cameras.; click to change the camera device list;click to add a new camera. 5.6.3 Pre-set point and auto cruise (For PTZ) Click the camera into real-time monitor -- turn to next page -- preset position - 12 -...
Page 13
Remarks: HD is a higher-definition display effect than SD (recommended to use when the network is good) - 13 -...
Auto Cruise Function: Number 1-16 means 16 points you want to set up Adjust the camera rotation to the first point you want to monitor on the app; input "1" and Setting; Adjust the camera rotation to the second point you want to monitor on the app; input "2" and Setting; ……until set up 16 points……...
5.5.5 Set factory of the camera 5.6.6 Alarm management and notification Recording and alarm, default recording all day;APP push is off by default;Recording time period and alarm time period can be customized - 15 -...
5.6.13 SD card setting The files in the SD card cannot be deleted to keep the playback function coherent, the SD card will automatically overwrite the earliest recording 5.6.14 Default setting 6. Computer Browsing Access 6.1 Download Search Tool Download Software from the website ( http://www.gentlen168.com/security-camera/info/898.html) or Mini CD in the package,open the file and install search tool in your computer.
Note:Through the search tool you can find all IP camera in your local area network, and can modify th e basic configuration of the camera such as: IP address, user and password, camera name, etc... You can also access the camera through the browser (recommended IE browser), in the browser you can test the camera and configure all the settings of the camera.
6.3 View Video by Browser Support IE, Google and Firefox browser, Install ActiveX before view video. 6.4 Interface Multiple preview modes. Region A Region B View memory card capacity and date. - 21 -...
Click on the capture and take the current image. Local manual recording. Video Recording playback: Click the playback, select the date and time, select the local playback or SD card playback, search the video files and double click on the file to play. PTZ control operation interface, control the camera to rotate horizontally and vertically.
OSD Set: Set time stamp, time show, camera name and name show in this interface. Image: Adjust the brightness, saturation, contrast, exposure parameter and set the WDR, Aemode, Imgmode, Intelligent night mode, IR LED Control, IRCut in this interface. (The camera does not support full colour night vision and smart night vision currently.) Audio: Audio type support G711 / 726 protocol, audio stream selection on/off, audio input type selection, input / output volume adjustment...
Page 24
Wireless: Enable Wireless to search and select the wireless network that you want to add, put password. Click the “check” to verify camera if connected to the wireless signal. DDNS: To set up DDNS (Remote access), requesting an dynamic domain name to fill in the username and password which provided by Service provider.
Page 25
Platform: this function was replaced by P2P, please use P2P to complete your setting. ONVIF: Set the Server Port, Preview, Time zone Setting, Image Setting, NVC Type in this interface. P2P: Enable this function, can watch video in Mobile App via add UID Number. - 25 -...
6.5.3 SettingAlarm Audio alarm: Enable this function. Need to connect a buzzer, turn on & adjust the volume, audio alarm can work well. Motion detection: There are 4 windows selections under Motion Detection. Select different windows to - 26 -...
Page 27
display different window positions. Drag the selected window to enlarge the window proportion. Manually type the sensitivity value or swipe the sensitivity bar to adjust the sensitivity. Alarm: Email setting method is the same as Phone APP. Set the FTP server setting and Image capture in this interface.
Page 29
Auto snap: Time capture, Choose to set the SD card snap interval or FTP snap interval and save route. Timed record: Set the Record files duration, whether to open Record and stream. - 29 -...
Page 31
Terminal: Set the cruise laps, select the centred while self-check on/off, close the alarm PTZ movement on/off and indicator display mode. 485Set: These cameras can’t support RS485. Multiple setting: In the same LAN, two or more of this series products from our company's, can be displayed on the same page via this Multiple Setting.
Page 32
Video Shade: Video shade setting method is the same as the motion detection. Restart timer: Turn on the restart timer and set restart time, then click “Apply”, the camera will follow the settings to scheduled reboot. - 32 -...
6.5.5 Settings System Time: Select the NTP server to synchronize the camera with the internet network time, click to “Sync with PC time”. The camera time automatically becomes the time displayed on the computer. Initialize: Set the Language (only available in Chinese and English currently), Lenstype, Reboot, Factory default, Backup setting data and system upgrade in this interface.
Page 34
Device information: The device information include device ID, device type, network connection and etc. System Log: The system log records all the steps of the device. - 34 -...
7. Video Management Software (HIP2P Client) Using Video Management software to view multiple cameras at the same time 7.1 Software installation Scarica dal sito Web (http://www.gentlen168.com/security-camera/info/898.html) o Mini CD nel pacchetto. Installalo sul tuo computer. Nota: questo programma riconosce l'UID della videocamera e non l'IP della videocamera. L'IP della telecamera è...
7.2 Add Camera A) Open the software, click , to login system, default password: leave it blank. B) Click to Set an Area name (Like: office / home / factory……), you also can modify and delete Area as picture showing below. - 38 -...
Page 39
C) Click “Search” to find IP Camera in the LAN, Select the camera click “add” to Add camera. D) Double Click camera’s UID to modify camera’s password. (Applicable after the camera is added to wifi, or after the camera has been connected to the network by cat5/6. You can access your camera anywhere by internet.).
Page 40
E) Click Back to preview screen, Double-click the camera name in the device list to preview the screen in real time.(Or right click on the connection pointed by the mouse) - 40 -...
Frequently Asked Questions Q1: Remote viewing, appear pause and delay phenomenon? A:1) Related to network data, it is recommended to adjust the HD mode to Smooth mode when watching, and the video file is still saved in HD mode. 2) Try to reduce the camera stream when view the video, reducing the stream may affect the quality of the image. 3) Remote viewing, the network recommends uploading network data up to 512KB/S.
Page 42
A:1) Login to web version and go to the camera setting, change the automatic IP address to manual setting. 2) The IP address which automatically obtain will vary depending on the IP assigned by your router's DHCP. Q5: Is the device not online? A:1) The router disables MAC address filtering.
Page 43
Q15: Can't search for the camera IP address in the local area network. A: Our device default IP address network segment 192.168.1.X, you need to modify your network IP address network segment to the same network segment, then use the search tool on the CD to search for IP addresses. Q16: How to make the camera automatically cruise after setting the preset point? A: Preset point 1-16 call command 41, 17-32 Calling Command 42, 65-80 Calling Command 43, 113-128 Calling Command 44, 128-144 Calling Commands 45, 146-160 call command 46, 161-176 Calling Command 47, 177-192...