Electrical Hazards; Basic Safety Measures (Must Always Be Observed!) - Bossard BST-BC-2830 Operating Instructions Manual

Single charger
Table of Contents

Advertisement

WARNING
The workplace is only to be used
• for intended purposes
• if it is in proper and safe working condition.
2.3

Electrical hazards

DANGER
Only allow work to be carried out by electrical specialist. Regularly check the
electrical equipment. Rectify loose connections immediately.

2.3.1 Basic safety measures (must always be observed!)

a) Keep your work area in good condition. A disorderly work area can result in an
accident.
b) Take environmental factors into account. Do not expose the charger station to rain.
Do not use the charger station in a humid or wet environment. Ensure that there is
sufficient illumination. Do not use the charger station in the proximity of flammable
liquids or gases.
c) Keep children away. Do not allow other persons to touch the device or cable; keep
them away from your work area.
d) Use the correct device. Do not use the charger station for purposes and work for
which it was not intended.
e) Do not misuse the cable. Do not pull the plug out of the power socket by the cable.
Protect the cable against heat, oil and sharp edges.
Maintain your device with care. Keep your charger station clean in order to work
f)
better and more safely. Regularly inspect the cable and, in case of damage, have it
replaced by a qualified expert. Keep the device dry and free of oil and grease.
g) Pull out the main power plug, when not in use and before maintenance.
- 7 -

Advertisement

Table of Contents
loading

Table of Contents