Table of Contents
Advertisement
3 Start-up and use
NOTICE
Only use the charger station in dry rooms. All ventilation slits must be
unobstructed. Place the device as far away as possible from exposure to heat
and solar energy, as an ambient temperature of more than 35° C can lead to
substantially longer charging times.
NOTICE
Prior to connecting the device, the specifications on the type plate concerning
line voltage, frequency and current consumption must be observed. Once the
main power cable has been inserted in the power socket, the charger station
is operationally ready. Nothing else needs to be switched on.
3.1
Operation
LED left
Description
Shows, that the charger is connected to the power.
Charger defective. Don´t charge other batteries on this charger because they could be dam-
aged or defective after charging. Change the charger or let it repair by a professional. Don´t
open the casing by yourself because you could get an electrical shock.
LED right
Description
Battery is to hot or cold. Preferably charge the battery at room temperature.
Battery is damaged. Remove the batterie and give it to the repair station or change it. A
battery may only be repaired by professionals. Please don´t open the casing by yourself
because you could get an electrical shock.
Battery is in charge.
Battery is charged (full).
WARNUNG
When charging two batteries consecutively, it is recommended to allow the
charger to cool down between charges. There is no OEM concern with the
charger remaining plugged and a fully charged battery residing in the charger
following full charge levels. If the battery is fully charged on the charger, no
charging current flows; result, the charging process has stopped.
- 10 -
Advertisement
Table of Contents
