Desk Lights - Theatrelight CUEMASTER Quick Operation

10 CUEMASTER OPERATION
The Cuemaster is fitted with sockets for Littlite or similar BNC goose-neck working lights. Please note the following points:
The bulbs specified for use in the worklights fittings are 24 Volt, 2.8 Watts, Lucas LLB 865 or equivalent, and are easily obtainable at any
automotive electrical supply house.
If you attempt to use bulbs of a lower voltage, or higher wattage than that specified, the worklight fuse on the back panel may blow.
Hold down the indicated
key and keep it held down
for the following operation
Press the indicated
key once and then
release it

DESK LIGHTS

SYMBOLS USED IN THIS MANUAL
Move the indicated
fader in the direction
of the arrow
LED be On
MUST
before starting the
operation
LED is on