Table of Contents
Advertisement
FORWARD & REVERSE
• Rotate the Knob located at the rear, top
of the tool handle to control Forward/
Reverse operation (FIG 7). This Knob
offers 30° of travel. Note that rotat-
ing the Knob in a Clockwise direction
will allow the tool to run forward while
Counter-clockwise will reverse the
wheel rotation direction.
ADJUSTING
HEAD ANGLE
• Lift the Locking Lever of the Clamping
Collar (FIG 8).
• Grip the head firmly and snap it up or
down 25°.
NOTE: To move the head, it may be
necessary to further loosen the clamp
by loosening the socket head cap
screw by gripping it with a thumb and
forefinger.
• Push the Locking Lever of the Clamping
Collar back down to the Lock position
(FIG 9).
To order parts and supplies: 800.343.9353 >> eastwood.com
FIG. 7
FIG. 8
Up
FIG. 9
Down
Locked
Socket
Head
Screw
7
Advertisement
Table of Contents
