Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Eastwood 31847
- Page 1 Item #31847 3" ADJUSTABLE HEAD CUT-OFF TOOL INSTRUCTIONS...
-
Page 2: Specifications
The EASTWOOD 3”, ADJUSTABLE HEAD CUT-OFF TOOL offers a full 50° (+- 25° ) of additional head angle adjustability to safely access areas difficult to reach with ordinary pneumatic Cut-Off tools. The reversible feature allows the user to choose the direction of the resulting “spark-shower” to avoid injury and property damage. -
Page 3: Safety Information
Always use NIOSH approved respira- tory protection while using this tool. HEARING DAMAGE HAZARD! • The Eastwood Adjustable Head, Cut-Off Tool emits high sound levels while operating. Use ANSI approved ear protection when operating this tool. BURST HAZARD! •... - Page 4 PINCH HAZARD! • Keep fingers from between moving parts when adjusting the angle of the Head. VIBRATION INJURY HAZARD! • This tool will vibrate during use! Repeated exposure to vibration may cause physical injury. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
- Page 5 17mm Flat Wrench. • While holding the 17mm Flat Wrench on the Flange Nut, thread in the REVERSE THREADED Socket Head Lock Screw and snugly tighten (Do Not Over-Tighten). FIG. 4 To order parts and supplies: 800.343.9353 >> eastwood.com...
-
Page 6: Operation
Cut-Off Wheel to do the work. • Be sure that the workpiece is clamped down or held securely to minimize the danger of injury while operating tool. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com... - Page 7 FIG. 9 forefinger. • Push the Locking Lever of the Clamping Collar back down to the Lock position (FIG 9). Down Locked To order parts and supplies: 800.343.9353 >> eastwood.com...
-
Page 8: Usage Tips
• Periodically, with the air supply disconnected, check cut-off wheel condition and Angle Adjust- ing Screw tightness. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com... - Page 9 NOTES To order parts and supplies: 800.343.9353 >> eastwood.com...
- Page 10 NOTES Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
-
Page 11: Troubleshooting
Stop use immediately, check for and replace Tool Vibrates damaged Cutting cracked or broken Cutting Wheel. Excessively Wheel During Use Loose Locking Tighten loose Locking Socket Head Cap Screw. Screw To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 12: Additional Items
1/4” FNPT Type M, Quick Connect Coupler If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: tech@eastwood.com PDF version of this manual is available at eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA 800.343.9353 eastwood.com...