Table of Contents
Advertisement
The EASTWOOD 3", ADJUSTABLE HEAD CUT-OFF TOOL offers a full 50° (+- 25° ) of additional head
angle adjustability to safely access areas difficult to reach with ordinary pneumatic Cut-Off tools. The
reversible feature allows the user to choose the direction of the resulting "spark-shower" to avoid
injury and property damage. A high-torque, ball bearing supported, 4 vane motor provides smooth
operation and long life. Speed is easily controlled with a variable speed control knob while motor
activation is by paddle control.
CONTENTS
(1) 3", Adjustable Head Cut-Off Tool
(1) 11mm Flat Wrench
(1) 17mm Flat Wrench
(1) 4mm Hex Key Wrench
(1) 3" Cut-Off Wheel
(1) 1/4" MNPT, Male Quick-Disconnect Inlet Fitting
SPECIFICATIONS
RPM: 16,000 free speed
Air Consumption: 3.6 CFM [100 L/min]
Inlet Thread Size: 1/4" FNPT
3 Position, Adjustable Head; set straight, 25° up or 25° down
Variable speed, 4 vane, ball bearing air motor
Rear Exhaust
Replacement Cut-Off Wheel Size:
3" x 3/8 [9.5mm]" Arbor, minimum 16,000 RPM.
2
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
Advertisement
Table of Contents
