Maintenance - Bio-Blaze DIAMOND I Safety And Assembly Instructions Manual

EnGLISH
To put out the fire, please use the extinguisher provided in the kit.
step 3 - Extinguishing the fireplace
Never refill a burning burner.
step 4 - Refilling and lightning
When the flames are out, you need to wait until the burner is cold (+/- 20minutes).
If you decide to extinguish the fire, you need to wait 20 minutes before putting on the flames again.

mAInTEnAnCE

You can use a wet cloth to clean the surface of a Bio Fireplace.
The burner can change color because of the heat. The stainless steel will have another appearance
after a while. This is normal. A regular maintenance will keep its color. Do not clean with water or
put in a dish washer. Just with a little bit of bio ethanol on a paper towel, go across the slot and the
surface.
The stones can be cleaned if you wish with a brush and water.
For Diamond version I: the cylindrical burners can be cleaned with water.
WARRAnTY
3 years warranty on the fireplace.
There is no warranty on the accessories such as stones, ceramic wood, funnel and the lighter or if
any modification has been done to the Bio-Blaze
No modifications can be made on the product.
Use only genuine replacement parts.
Bio-Blaze reserves the right to make any technical alterations in order to improve the product and
®
its characteristics/ safety.
To put out the fire use the extinguisher provided in the kit.
Never blow out the flame in order to put it out, this will only increase
the flame.
Step 4 - Refilling and lightning
Never refill a burning burner.
product.
®
or if