Installation - Bio-Blaze DIAMOND I Safety And Assembly Instructions Manual

EnGLISH

InSTALLATIon

Step 1
The hanging system is integrated in the back of the fireplace. First mount the top wall bracket, using
good quality plugs and screws that suits your type of wall, then lift the fireplace up ensuring that
the rear ledge of the fireplace engages the top wall bracket and is sitting centrally positioned on the
bracket.
Ensure that the fireplace is well attached to the wall. The Bio-Blaze
walls without any flammable materials.
Make sure that there are no electric cables or wiring located behind your fireplace.
Ensure that flammable products (curtains, furniture or other flammable materials) are not nearby the
fireplace.
Keep a safety distance of at least 1 meter or 3 foot (on the left-, right- and front side) for objects.
Keep a safety distance of at least 1 meter or 3 foot between fireplace and ceiling.
Step 2
Place the burner(s) in the insert/ opening.
Only for Diamond I version: The flame reducers are to be placed on the top of the cylindrical burner.
Do not take out the reducers while burning. You may get injured
Step 3
Wash the heat resistant stones before using them with water and soap. Let them dry. Now the stones
are ready to be used.
If you are using any other type of decorative log set or ceramic stones make sure that they are heat
resistant.
Make sure that stones or log sets are not placed in to the flame, the closing and opening space of
the burner needs to be clear and accessible.
Step 1 - Fuel
fireplace can only be hung on
®