In Case Of Power Failure; Surface Burners - Monogram ZGU366 Owner's Manual

USING THE RANGETOP
ACCENT LIGHTING CONTROL
This button controls the LED accent lighting to the control
panel. Custom color options for the knob and task lighting
are available through the app.
■ LED Accent light ON
■ LED Accent light ON and knob lights ON
■ All OFF
IN CASE OF A POWER FAILURE
In the event of a power failure. The surface burners may
be lit with a match. Using extreme caution, hold a lit match
near the ports beneath the surface burner cap, then

SURFACE BURNERS

Lighting a Surface Burner
WARNING
Burners should be operated only when
covered by cookware. Burner flames not covered by
cookware present a risk of fire or clothing ignition.
Never let flames extend beyond the sides of the
cookware. Failure to comply may result in serious
injury.
Make sure all burners are in their correct locations and
fully assembled before attempting to operate any burner.
Select a burner and find its control knob. Push the knob in
and turn it to the LITE position.
Selecting a Flame Size
Watch the flame, not the knob, as you adjust heat. When
rapid heating is desired, the flame size should match the
size of the cookware you are using. Flames larger than
the bottom of the cookware will not heat faster and may be
hazardous.
Using the Surface Burners
NOTES:
■ D o not operate the burner for an extended period of
time without cookware on the grate. The finish on the
grate may discolor or chip without cookware to absorb
the heat.
■ D o not attempt to disassemble any burner while another
burner is on. Damage to the product may occur.
■ B e sure the burners and grates are cool before you
place your hand, a pot holder or cleaning materials on
them.
8
slowly turn the knob to the LITE position. Once lit, surface
burners will continue to operate normally.
You will hear a clicking noise—
the sound of the electric spark
igniting the burner. When one
burner is turned to LITE, all
burners will spark. Sparking will
continue as long as the knob
remains at LITE. Once gas is
ignited, turn the knob to adjust
the flame size.
Automatic Reignition
The burners on this range will automatically relight if the
flame goes out.
These flames are too large for the pot
Your rangetop has sealed gas burners that offer
convenience, cleanability and flexibility for a wide range of
cooking applications.
Push the control knob in and
turn it to the LITE position.
49-2000664 Rev. 1