Table of Contents
Advertisement
SAFETY INFORMATION
To order parts and supplies: 800.343.9353 >> eastwood.com
READ INSTRUCTIONS
• Thoroughly read and understand these product instructions before using
this tool. Failure to follow all warnings can result in tool damage or serious
physical injury.
• Keep these product instructions for future reference.
• Tool can eject metal particles, dirt and debris at high velocity.
Always wear ANSI approved eye protection when operating this tool.
• This Eastwood Pneumatic Tool emits high sound levels while operating.
Use ANSI approved ear protection when operating.
• Do not exceed 90 psi (6.3 bar) of tool inlet pressure. Permanent tool
damage and/or explosion could occur and cause personal injury.
• The tool can suddenly kick back or twist causing severe hand or wrist injury.
• Always make sure the workpiece is securely clamped or anchored to avoid
sudden movements which could result in injury.
• Frequently inspect impact tool and sockets (not included) condition. If cracks
develop, discontinue use immediately and replace damaged socket.
• Always disconnect tool from air supply when changing sockets and
accessories to prevent accidental tool starting and potential injury.
• This tool will vibrate during use! Repeated exposure to vibration may
cause physical injury.
EYE INJURY HAZARD!
HEARING DAMAGE HAZARD!
BURSTING HAZARD!
INJURY HAZARD!
VIBRATION INJURY HAZARD!
3
Advertisement
Table of Contents
