Table of Contents
Advertisement
The EASTWOOD 1/2" COMPOSITE, STUBBY AIR IMPACT WRENCH is a heavy-duty, professional
quality tool engineered for many years of reliable service. It features a large-capacity jumbo hammer
driven by a ball bearing motor for smooth operation and long life. The rugged composite body provides
lighter weight and superior strength for less operator fatigue while the compact "stubby" design fits
where larger guns cannot.
CONTENTS
(1) 1/2" Stubby, Composite Impact Gun
(1) 1/4" MNPT, Male Quick Disconnect Inlet Fitting
SPECIFICATIONS
Square Drive:
RPM:
Maximum Torque: 500 ft-lbs [678 N.m]
Air Consumption: 4 cfm [113 L/m] @ 90 PSI
Inlet thread size: 1/4" FNPT
Three forward torque settings, one reverse setting
Ball bearing supported, jumbo hammer air motor
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information
provided with this product:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
2
1/2"
10,000 free speed
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
Advertisement
Table of Contents
