Eastwood 1/2” ELECTRIC IMPACT WRENCH Instructions Manual

Eastwood 1/2” ELECTRIC IMPACT WRENCH Instructions Manual

Electric impact gun

Advertisement

Quick Links

Item #31799
ELECTRIC IMPACT GUN
INSTRUCTIONS

Advertisement

Table of Contents
loading

Summary of Contents for Eastwood 1/2” ELECTRIC IMPACT WRENCH

  • Page 1 Item #31799 ELECTRIC IMPACT GUN INSTRUCTIONS...
  • Page 2: Specifications

    The EASTWOOD 1/2” ELECTRIC IMPACT WRENCH is great for use where a compressed air supply is unavailable. The powerful 7.5 Amp motor and 1/2” square drive powers impact sockets and accessories with ease. A simple, Reverse/Forward rocker switch provides instant response.
  • Page 3: General Safety Rules

    When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. To order parts and supplies: 800.343.9353 >> eastwood.com...
  • Page 4: Personal Safety

    Use of the power tool for operations different from those intended could result in a hazardous situation. Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
  • Page 5: Additional Safety Information

    If excessive vibration is felt, discontinue use immediately and disconnect tool from electrical supply. Inspect socket, accessory or Impact Wrench for damage. Do not resume use until resolution is found. To order parts and supplies: 800.343.9353 >> eastwood.com...
  • Page 6: Operation

    • When the fastener has been loosened, release trigger and allow the Impact Wrench to stop rotating before pulling the socket away from the fastener. DO NOT force the Impact Wrench forward or kickback could quickly occur causing severe injury! Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
  • Page 7: Maintenance

    Tight and Motor Exceeds Torque Discontinue use of Impact Wrench. Overheats Capacity of Impact Dirt and Debris Buildup in Use a brush or compressed air to remove debris. Motor Cooling Air Slots To order parts and supplies: 800.343.9353 >> eastwood.com...
  • Page 8: Additional Items

    Mini Metal Saw If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/31799manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.343.9353 Outside US: 610.718.8335...

This manual is also suitable for:

31799

Table of Contents