Bunn CWT-APS-DV Operating & Service Manual page 22

SERVICE (cont.)
TANK HEATERS (cont.)
15. Reconnect the wires to the limit thermostat and
tank heaters and control thermostat. See Limit
Thermostat and Control Thermostat sections in
this manual when reconnecting wires.
16. Install fill basin, secure with tank inlet fitting and
gasket. Insert water supply line through grommet
in fill basin.
17. Refer to Fig.13 when reconnecting the tank heater
wires.
RED to Terminal Block
FIG. 13 TANK HEATER TERMINALS
WHI/VIO to Selector Switch
Thermal Fuse W/BLK Lead
to Control Thermostat
BLU to Voltage
Selector Switch
Page 22
P2751
36102 090203