Table of Contents
Advertisement
English
Assembly Instruction
STEP 1
Screw 4 CAM BOLTS (02) into the bolts holes of PEDESTAL TOP (A). See
Diagram B.
STEP 2
1. Screw 4 CAM BOLTS into the bolt holes on the LEFT SIDE BOARD (C). See
Diagram A
2. Insert 2 CAM LOCKS (03) with the arrows facing towards the top hole on
LEFT SIDE BOARD (C). See Diagram A.
3. Insert 4 WOODEN DOWELS into the holes on the LEFT SIDE BOARD (C).
See Diagram A
4. Repeat Steps 1-3 for RIGHT SIDE BOARD (B). See Diagram C.
STEP 3
Insert 4 CAM LOCKS into TIER BOARD (F). See Diagram D.
STEP 4
Insert 4 CAM LOCKS into the PEDESTAL BOTIOM (G). See Diagram E.
STEP 5
1.
Attach the Tier Board (F) and the Pedestal Bottom (G) to the Left Side Board
(C). The Cam Locks should be facing towards the bottom of the stand. Make
sure all pieces have the front facing the some way. Using a #2 Phillips head
screwdriver, turn the Cam Locks clockwise until they are tight. See Diagram
F.
2.
Attach the Right Side Board (B). Turn the Cam Locks clockwise until they are
tight. See Diagram F.
3.
Slide the Back Board (E) into the slots between the Left Side Board (C) and
the Right Side Board (B) from the top of the stand. Make sure the two
predrilled holes in the Back Board are at the bottom of the stand. Screw the
Back Board in place using two supplied screws (07) and the predrilled holes
in the Back Board. See Diagram G.
4.
Attach the Pedestal Top (A} to the top of Left Side Board (C) and Right Side
Board (B). Turn the Cam Locks clockwise until tight. See Diagram H.
5.
Attach the Door (D) to the Left Wood Side (C). Make sure the hinges are
opened up. Line up the holes in the hinges with the predrilled holes in the Left
Side Board (C). Using eight supplied screws (06) and a #1 Phillips
screwdriver, fasten the door. See Diagram I.
4
Advertisement
Table of Contents
