Buffalo AirStation WLI2-USB2-G54 User Manual page 4

2. Installing the Wireless 54 Mbps* USB Adapter:
◗ Power on the notebook PC and let it boot into Windows. Plug the Wireless USB Adapter into an
available USB port on your PC. A USB 2.0 port should be selected if possible. Depending on
the type of computer that the Wireless USB Adapter is being installed on, the USB ports can be
located in different areas of the case. Check with the PC manufacturer if the USB ports can not
be located. Once the Wireless USB Adapter is plugged in correctly, the Found New Hardware
Wizard will launch automatically. If the Found New Hardware Wizard does not launch, remove
the Wireless USB Adapter and restart the notebook. Reinsert the Wireless USB Adapter once the
notebook has rebooted.
◗ Select Install the software automatically. Click the Next button.
4
Introduction