Buffalo AirStation WLI2-USB2-G54 User Manual page 17

Survey Page
Click the Survey tab to open this page. Use this page to survey the area, display available access
points, and connect to available access points.
Note: The part number of the client device displayed in these
screenshots is not reflective of your specific client device.
Press the 'Connect' button to connect to a listed SSID, or press the 'Refresh' button to perform
another survey and update the survey list.
* The signal meter in the bottom left area will show more bars when the signal to noise ratio is
higher. This tool can be used in positioning your client device or access point. A red 'cross-out'
over the signal meter indicates that the client is not connected to an access point. The part number
of the client device will also be displayed next to the signal meter.
Client Manager Configuration
This page includes the following components:
• Wireless SSID – Displays the SSID associated with
each available access point. The SSID is the unique
network name that functions as an identifier for your
wireless devices. All wireless devices on a network must
use identical SSIDs to successfully associate with other
devices on the network. buffalo_test is an example of a
valid SSID.
• Mode – Displays the mode/rate set that the remote
wireless device is offering.
• Key – Displays whether the wireless network is using
any sort of encryption.
17