Connecting The Antenna - Buffalo WLE-DA2 User Manual

Connecting the Antenna

AirStation Routers/Access Points
Large Form Factor Access Points / Routers
Locate the antenna connector sliding door on the
rear of the AirStation.
Slide the door down on the rear of the AirStation to
reveal the external antenna connector.
Note: On some AP's the door slides sideways.
Connect the antenna to the AirStation by plugging
the male MC Card connector on the antenna cable
to the female MC Card connector on the AirStation.
Push firmly into place to ensure a good connection.
Run the cable down the left side of the AirStation
and push behind the plastic tab to keep the antenna
from coming loose.
5