Wle-Da2; Technical Specifications - Buffalo WLE-DA2 User Manual

Buffalo wle-da2 antenna: user manual
Hide thumbs Also See for WLE-DA2:
Table of Contents

Advertisement

Connect the antenna's MC card connector into the wireless device. Then adjust the antenna
to send/receive the best signal. When using the antenna on an adapter you can judge the
signal strength by watching the bars on the client manager as you adjust the antenna. When
used on a router/AP you can test it by placing a device with a wireless adapter at a low signal
position and then move the antenna on the router/AP to see if the signal improves.
Approximate Range

Technical Specifications

Polarization Method
Connector Type
Frequency Range
VSWR
Antenna Gain
Range Goal
Dimensions
Weight
Package Contents
Vertical Polarizations
MC
2,401 - 2,484 MHz (1-11channel)
1.5 or less with coaxial cable
Total gain 4 dbi or more, including the cable loss
Unobstructed =200% (400% or more using
flatbed antennas on both sides)
100 X 100 X 17 mm
0.3 g
AirStation FlatBed Antenna, Mounting Screws,
RP-TNC to MC card adapter, Reference Card,
Warranty card, Manual
12

WLE-DA2

Advertisement

Table of Contents
loading

Table of Contents